Diversified

This work center can be used against a wall or as an island. The unit includes two base cabinets made of plywood and solid hardwoods finished in an earth-friendly UV finish. One locking base cabinet provides a place for storing larger items and includes one adjustable shelf. The other cabinet has three dovetailed drawers which lock. Also included with this model is our mobile clay cart (see C-38), which fits nicely between the two cabinets. The center is completed with a 1-1/4" almond colored plastic laminate top.

Whether you are storing paper, rocks, or insects this unit will fit the bill. Seven large drawers (4"H x 44"W x 26"D) big enough to hold large flat objects, each has a maximum weight limit of 100 lbs. The three shelves (two adjustable) allow you to store over-sized items like models. Unit is constructed of your choice of maple or oak veneers and hardwoods with an earth-friendly, chemical-resistant UV finish. It has a three-point locking handle system.

Whether you are storing paper, rocks, or insects this unit will fit the bill. Seven large drawers (4"H x 44"W x 26"D) big enough to hold large flat objects, each has a maximum weight limit of 100 lbs. The three shelves (two adjustable) allow you to store over-sized items like models. Unit is constructed of your choice of maple or oak veneers and hardwoods with an earth-friendly, chemical-resistant UV finish. It has a three-point locking handle system.

One piece top including sink is molded of polyolefin (It's easy to clean, extremely chemical resistant, and is highly impact resistant to reduce glassware breakage). Long grooved sloping counter leads to large sink in center. The low temperature strength eliminates cracking with dry ice, and the sink measures (24-1/2"W x 18-1/2"D x 14"H). It includes a hot and cold water mixing faucet. The base is constructed of hardwood and oak veneers with a chemical resistant, earth-friendly UV finish. Two adjustable shelves can be found inside the outer cabinets. Includes: pulls, locks and rubber base molding. The back panels is unfinished with a plumbing cut-out.

Provides a sturdy maple base to work on projects. The panel style legs are made of solid maple and have adjustable levelers. The top is 1-1/4" almond colored plastic laminate. The unit can be ordered with (30"H) or without casters (27"H) and in three lengths. The 36"W unit has one grommet hole and the 48"W and 60"W units have two grommet holes. All units are 30"D.

Provides a sturdy maple base to work on projects. The panel style legs are made of solid maple and have adjustable levelers. The top is 1-1/4" almond colored plastic laminate. The unit can be ordered with (30"H) or without casters (27"H) and in three lengths. The 36"W unit has one grommet hole and the 48"W and 60"W units have two grommet holes. All units are 30"D.

Provides a sturdy maple base to work on projects. The panel style legs are made of solid maple and have adjustable levelers. The top is 1-1/4" almond colored plastic laminate. The unit can be ordered with (30"H) or without casters (27"H) and in three lengths. The 36"W unit has one grommet hole and the 48"W and 60"W units have two grommet holes. All units are 30"D.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.

The Corrosive Chemical Storage Cabinet is the solution for storing non-flammable acids and corrosive liquids. This storage cabinet is constructed of 3/4" thick exterior grade plywood with a finished top and lined with a 1/4" polypropylene interior. Included is a removable back panel to access the venting behind the cabinet, 2" plastic containment drip pan, (1) lined adjustable shelf and 96mm pulls. This unit is available in either two doors or single door and is finished in Northwood’s UV finish.