Diversified

A compact service island constructed of solid oak hardwood and oak veneers, with a chemical resistant, earth-friendly UV finish. This unit can be grouped with tables to provide an efficient working arrangement. The unit includes one 14" x 10" x 6" solid epoxy resin sink, two combination cold water/gas fixtures, two GFI AC duplex electrical receptacles, chemical-resistant polypropylene trap, and locking cupboard.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This bench is constructed of solid maple legs and stringers, and plywood shelves and is designed to provide open storage of 30" metal sheets. The top is 2-1/4" thick maple and protected on two long edges with 2" x 2" angle iron. The unit can be ordered with no, one or two stake plates. Overall size; 40"D x 31-1/4"H and your choice of 60"W or 96"W.

This table is made to accept bar clamps and to provide an area for both gluing projects and clamp storage. The top is open and includes 17 sets of 3/4" wide grooves which accept bar clamps three feet and over. These grooves are cut into heavy gauge steel rail. The lower center rail is adaptable for storage of hand screws and “c” clamps. The base is made of solid maple and finished with an earth-friendly UV finish. Can also be ordered without a drip pan. Overall size: 72"W x 36"D x 32"H.

This table is made to accept bar clamps and to provide an area for both gluing projects and clamp storage. The top is open and includes 17 sets of 3/4" wide grooves which accept bar clamps three feet and over. These grooves are cut into heavy gauge steel rail. The lower center rail is adaptable for storage of hand screws and “c” clamps. The base is made of solid maple and finished with an earth-friendly UV finish. Can also be ordered without a drip pan. Overall size: 72"W x 36"D x 32"H.

It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.

It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.

This unique L-Shaped unit is designed so four students can use the workstation while facing the teacher. It has storage on the peninsula and on the wall. It is made of oak and oak veneers with black accents. The unit can be ordered with a 1" epoxy resin top. Three sink options are available: epoxy sink (18"L x 15"W x 7.9"D) on the wall section, epoxy sink (16"L x 8"W x 6.8"D) in the peninsula or a no sink option. Units with sinks include cold water fixtures (call for quote if gas is needed). All units include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly chemical resistant UV finish. Assembly and installation of electricity and plumbing is required. Wall portion measures: 90"W x 14"D; peninsula extends: 96"; Overall size: 110"D x 90"W x 36"H.